Space

November 8, 2013

NASA’s Orion sees flawless fairing separation in second test

The three panel or fairings encapsulating a stand-in for Orionís service module successfully detach during a test Nov. 6, 2013 at Lockheed Martinís facility in Sunnyvale, Calif.

The three massive panels protecting a test version of NASA’s Orion multipurpose crew vehicle successfully fell away from the spacecraft Wednesday in a test of a system that will protect Orion during its first trip to space next year.

The panels, called fairings, encase Orion’s service module and shield it from the heat, wind and acoustics it will experience during the spacecraft’s climb into space. The service module, located directly below the crew capsule, will contain the in-space propulsion capability for orbital transfer, attitude control and high-altitude ascent aborts when Orion begins carrying humans in 2021.

It also will generate and store power and provide thermal control, water and air for the astronauts.

The service module will remain connected to the crew module until just before the capsule returns to Earth. During Exploration Flight Test-1 (EFT-1), the spacecraft’s flight test next year, a test service module will be attached to the capsule.

“Hardware separation events like this are absolutely critical to the mission and some of the more complicated things we do,” said Mark Geyer, Orion program manager at NASA’s Johnson Space Center in Houston. “We want to know we’ve got the design exactly right and that it can be counted on in space before we ever launch.”

Unlike conventional rocket fairings, these panels are designed to support half of the weight of Orion’s crew module and launch abort system during launch and ascent, which improves performance, saves weight and maximizes the size and capability of the spacecraft. Each panel is 14 feet high and 13 feet wide.

The fairings’ work is done soon after launch. They must be jettisoned when Orion has reached an altitude of about 560,000 feet. To make that possible, six breakable joints and six explosive separation bolts are used to connect the fairing panels to the rocket and each other. In a carefully timed sequence, the joints are fired apart, followed shortly by the bolts. Once all of the pyrotechnics have detonated, six spring assemblies will push the three panels away, leaving the service and crew module exposed to space as they travel onward.

This test, conducted by Orion’s primary contractor, Lockheed Martin, at the company’s Sunnyvale, Calif., facility, was the second test of the fairing separation system. The first occurred in June, when one of the three fairing panels did not completely detach. Engineers determined the issue was caused when the top edge of the fairing came into contact with the adapter ring and kept it from rotating away and releasing from the spacecraft. Because of the engineers’ confidence in successfully eliminating the interference, they maintained plans to increase this week’s test fidelity by emulating the thermal loads experienced by the fairings during ascent. They used strip heaters to heat one of the fairings to 200 degrees Fahrenheit and simulate the temperatures the panels will experience.

Exploration Flight Test-1 is scheduled for September 2014. During that flight, an uncrewed Orion will launch to an altitude of 3,600 miles, more than 15 times farther into space than the International Space Station. It will orbit Earth twice before re-entering the atmosphere as fast as 20,000 mph.

The data gathered during the flight will influence design decisions, authenticate existing computer models, and innovative new approaches to space systems development It also will reduce overall mission risks and costs for subsequent Orion missions to an asteroid and eventually Mars.




All of this week's top headlines to your email every Friday.


 
 

 
NASA photograph

NASA begins engine test project for space launch system rocket

NASA photograph RS-25 rocket engine No. 0525 is positioned onto the A-1 Test Stand at NASAís Stennis Space Center in Mississippi preparation for a series of developmental tests. Engineers have taken a crucial step in preparing...
 
 

SSL selected to study asteroid retrieval for NASA

Space Systems/Loral, a leading provider of commercial satellites, announced July 18 that it was one of the companies selected by NASA to study system concepts and key technologies for NASA’s Asteroid Redirect Mission, which is expected to be a key part of the agency’s path to sending humans to Mars. SSL will conduct two studies;...
 
 
NASA image

NASA turns over next-gen air traffic management tool to FAA

NASA image As seen in this image, Terminal Sequencing and Spacing technology enables air traffic controllers to better manage the spacing between aircraft as they save both time and fuel and reducing emissions, flying more effi...
 

 
Image courtesy of NASA/JPL-Caltech, and SETI Institute

NASA seeks proposals for Europa mission science instruments

Image courtesy of NASA/JPL-Caltech, and SETI Institute Compiled from NASAís Galileo spacecraft data, this colorized surface image of Europa shows the blue-white terrains which indicate relatively pure water ice. Scientists are...
 
 

NASA announces early career faculty space tech research grants

NASA has selected seven university-led proposals for the study of innovative, early stage technologies that address high priority needs for America’s space program. The selected proposals for unique, disruptive, or transformational space technologies will address challenges in robotic mobility when traversing extreme terrain, in developing lightweight and multifunctional materials and str...
 
 
NASA photograph

NASA Armstrong recalls first moon landing, preps for ‘next giant leap’

NASA photograph In this 1967 NASA Flight Research Center photograph the Lunar Landing Research Vehicle (LLRV) No. 2 is viewed from the front. This photograph provides a good view of the pilot’s platform with the restricti...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>