Veterans

November 13, 2013

Technology helps remember fallen, ensures memories live on

Headstones made of Lasa marble line the grounds of Madingley American Cemetery Oct. 16, 2013, at Madingley, England. Each grave contains the body or identifiable remains of the named individual on the headstone, with the exception of 24 unknown service members. The 3,812 graves make up approximately 39 percent of the original total of Americans temporarily interred in the United Kingdom during World War II. Sixty percent were repatriated at the wishes of family and next of kin.

It was a damp, foggy morning in October, amidst a sea of marble headstones; the sound of bells chiming out seemed to echo the air of somberness all around at Madingley American Cemetery, near Cambridge, England. The whole scene was humbling.

With Veterans Day and Remembrance Day upon us, seeing the more than 3,800 Lasa marble headstones cover the grounds of the cemetery was even more poignant. Each grave contains the body or identifiable remains of the individual named on the headstone – with the exception of 24 unknown. The 3,812 graves make up approximately 39 percent of the original total of Americans temporarily interred in the United Kingdom during World War II. At the wishes of the family and next of kin, approximately 60 percent were later repatriated.

In the past it took both time and effort for families to find the specific resting place of their long-lost relatives. Once the next of kin arrived at Madingley American Cemetery, they could visit with the staff who would find the grave location in their database, then escort them to the grave site. If they were searching on their own, they would need to identify the correct gravestone block and then search within the block to find a particular gravestone.

During a visit to the cemetery, Master Sgt. Solomon Vincent, the engineering flight superintendent of the 100th Civil Engineering Squadron at RAF Mildenhall, England, thought there must be an easier way for people to find departed loved ones.

MSgt. Solomon Vincent, left, assists Senior Airman Logan Fountaine, center, and SrA. Young Park, as they set up a quadpod ready to attach an antenna Oct. 16, 2013, at Madingley American Cemetery near Cambridge, England. The airmen were taking GPS readings to annotate the exact location of each individual headstone. This equipment served as a base station, which collects data from 24 GPS satellites in orbit. All the data from the project will be made into an electronic map that allows families and friends of those lost in World War II to pinpoint the location of their resting place here.Vincent is a 100th Civil Engineer Squadron engineering flight superintendent and Fountaine and Park are 100th CES engineering flight.

“I saw some (people) there looking for their relatives, and they were just having the hardest time trying to find them,” Vincent said. “I’m a surveyor, and I thought, well what if we just pulled some coordinates of these places, to help (these people) find their loved ones. So I talked to the caretaker, and he liked the idea and was happy to give it a shot.”

But now, with more than a little help from members of the 100th CES engineering flight, that process is being made simpler and quicker, thanks to digital technology.

Despite the cold weather and fog Oct. 16, 2013, Airmen from the engineering flight patiently moved from headstone to headstone, measuring and tracking their exact position by using GPS equipment.

“We’re attaching latitude and longitude to each headstone,” Vincent said. “The reason we’re doing this is when somebody is looking for their loved one, there’s more than 3,800 headstones here, and they have to look through a spreadsheet, trying to find which row and which section their loved one is on. But (almost) everyone has GPS on their phone; you just put the coordinates into your phone and you can walk directly to the headstone, plus or minus one meter, and you’ll find your loved one.”

This cuts down on the time families spend searching and if the staff at the cemetery aren’t available, families can still easily find the resting place of whoever they are looking for.

Preparation is key

Vincent met with his airmen and they discussed ways to make this idea a reality. The team visited Madingley to perform a reconnaissance survey, to find good positions for their base stations and get an idea of any obstacles and obstructions, such as trees, which may hinder their work so they could develop solutions before they started.

SrA. Logan Fountaine uses a data collector to input information and GPS grid coordinates Oct. 16, 2013, located at each headstone in Madingley American Cemetery, near Cambridge, England. The equipment was a base station to collect data from 24 GPS satellites in orbit. All the data from the project will be used to create an electronic map to allow families and friends of those Americans lost in World War II to pinpoint the location of their resting place. Fountaine is a 100th Civil Engineer Squadron engineering flight journeyman.

They set up three base stations, each connecting to 24 satellites, providing the team vital information and pin-pointing the exact geographic location of each person’s headstone.

“This is for the survivors – the families,” Vincent said. “When they come out here, instead of spending their time looking for their loved ones, they can find (the headstone) quickly, then take their time here, at the grave, looking around the museum, talking with the caretaker and just seeing what the cemetery has to offer.

Brainstorming, problem-solving

The team initially ran into technical problems, but instead of letting the problems hinder the project, the Airmen found a way to overcome them.

“This is a scenario that I’m sure other career fields run into,” Vincent said. “You have a plan and it works well in your shop on base, but when you go outside the wire on a deployment, you have equipment and a plan you’re supposed to execute – but if the equipment doesn’t work, you have to be able to troubleshoot on the fly and fix it. So the young Airmen can apply this experience when they deploy – we ran into problems using the equipment here, but there’s no way we can get in the vehicles and go back to (RAF) Mildenhall to solve it. We had to solve the problem here (at Madingley) and we managed to do that.”

The project provides a two-way benefit, the crew said. Not only is it benefiting the cemetery and families, but it’s also a valuable training opportunity for the engineering flight members.

“Surveying is a necessary deployment skill for our Airmen, so training to keep their skills up is important,” said Lt. Col. Kevin Parker, the commander of the 100th CES. “We can train on trees and manholes, or we can do this, which provides benefit to someone else.”

SrA. Logan Fountaine uses GPS base equipment Oct. 16, 2013, to determine grid coordinates and measure latitude, longitude and elevation of headstones at Madingley American Cemetery, near Cambridge, England. Airmen from the 100th CES engineering flight were taking GPS readings to annotate the exact location of each individual headstone. All the data from the project will be used to create an electronic map that allows families and friends of those Americans lost in World War II to pinpoint the location of their resting place. Fountaine is a 100th Civil Engineer Squadron engineering flight journeyman.

Because of the large number of headstones to track, the project will take some time to complete. Spreading the work over a period of time also means the entire engineering flight will have the opportunity to be involved in the Madingley project.

Back at RAF Mildenhall, the information, including GPS coordinates and the name of the deceased, is collected into a database. Once complete, the information will be available on the internet, where relatives and anyone else searching for someone memorialized at Madingley, will be able to track the exact position of any headstone located there.

“As we move into an increasingly digital and technological age, this will be a tremendous benefit to help both families and cemetery staff to quickly and accurately locate the grave site of a loved one,” said Arthur Brooks, a Madingley American Cemetery associate. “This adds another dimension to what we do, and allows the current military to leave a lasting legacy for future generations.

“An exercise like this serves to foster and improve links between the U.S. Air Force and the community of the cemetery, and is vital in projecting the cemetery to a wider audience,” the cemetery associate said. “It brings the U.S. Air Force directly in close contact with those who paid the ultimate sacrifice in World War II, and those to whom we owe a debt that can never be fully paid.”

This debt also inspired Vincent and his team to give back to those who came before.

“Each time I come here, I leave a better person,” he said. “I appreciate what I have. I appreciate what I do. I feel that as a military member and a citizen of the United States, I feel it’s my duty to give back – because these people have paid the ultimate sacrifice. All I’m doing is standing in the cold, measuring some (GPS) shots. They were out in the cold being shot at; some were starving and some were (prisoners of war). I’m just trying to give back to my country and to these people.”

For more information on the Madingley American Cemetery and other cemeteries, visit www.abmc.gov.




All of this week's top headlines to your email every Friday.


 
 

 

Headlines December 17, 2014

News: U.S. Air Force tanker platform slated for year-end debut - Boeing is planning for first flight of its 767-2C – upon which the U.S. Air Force’s new KC-46 tanker will be based – by year’s end, six months late. Northrop Grumman wins $657.4 million deal to supply drones to South Korea - Northrop Grumman has won...
 
 

NASA launches new Micro-g NExT for undergraduates

NASA is offering undergraduate students an opportunity to participate in a new microgravity activity called Micro-g Neutral Buoyancy Experiment Design Teams. The deadline for proposals is Jan. 28, 2015. Micro-g NExT challenges students to work in teams to design and build prototypes of spacewalking tools to be used by astronauts for spacewalk training in the...
 
 
launch1

Storm fails to quench liftoff of secret reconnaissance satellite

The fiery launch of an Atlas V (541), among the most powerful of the venerable Atlas family, briefly dispelled the gloom over Californiaís Central Coast on the evening of Dec. 12. A team of personnel from United Launch Allianc...
 

 
Coast Guard photograph

Navy demonstrates unmanned helicopter operations aboard Coast Guard cutter

http://static.dvidshub.net/media/video/1412/DOD_102145893/DOD_102145893-512×288-442k.mp4 Coast Guard photograph An MQ-8B Fire Scout UAS is tested off the Coast Guard Cutter Bertholf near Los Angeles, Dec. 5 2014. The Coast...
 
 
GPS-OCX

GPS III, OCX successfully demonstrate key satellite command, control capabilities

Lockheed Martin and Raytheon successfully completed the fourth of five planned launch and early orbit exercises to demonstrate new automation capabilities, information assurance and launch readiness of the worldís most powerfu...
 
 

Aerojet Rocketdyne successfully demonstrates 3D printed rocket propulsion system for satellites

Aerojet Rocketdyne has successfully completed a hot-fire test of its MPS-120 CubeSat High-Impulse Adaptable Modular Propulsion System. The MPS-120 is the first 3D-printed hydrazine integrated propulsion system and is designed to provide propulsion for CubeSats, enabling missions not previously available to these tiny satellites. The project was funded out of the NASA Office of Chief...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>