Tech

November 15, 2013

NASA, Boeing finish tests of 757 vertical tail with advanced technology

NASA’s Ames Research Center hosts the world’s largest wind tunnel, where testing was recently completed on a full-scale Boeing 757 vertical tail.

NASA’s Ames Research Center and NASA’s Langley Research Center, in partnership with Boeing, have completed wind tunnel testing of a full-scale Boeing 757 vertical tail model equipped with active flow control technology.

A major objective of the tests was to show active flow control can enhance the performance of a vertical tail enough to enable future designers to reduce the size of the structure for a whole family of airplanes. That could reduce the penalties related to the vertical tail that aircraft currently pay in drag and weight.

The testing, which began in early September and concluded Nov. 4, took place at the U.S. Air Force’s Arnold Engineering Development Center’s 40- by 80-foot wind tunnel at Ames in Moffett Field, Calif.

“This test campaign is a key component of NASA’s Environmentally Responsible Aviation Project,” said project manager Fay Collier. “The maturation of technologies such as active flow control, which will benefit aviation by improving fuel efficiency, reducing emissions and noise levels, is what NASA’s aeronautics research is all about. The promising results of these wind tunnel tests and the following flight demonstration in 2015 undoubtedly will have an impact on future “green” aircraft designs,” said Collier.

The flow control on the 757 vertical tail model comes from sweeping jet actuators, which are devices that essentially blow air in a sweeping motion along the span of the tail. NASA provided the actuators as part of a collaborative agreement under its Environmentally Responsible Aviation Project.

“NASA is proud to be a part of the research to advance this technology,” said Thomas Edwards, director of aeronautics at Ames. “The tests were successful and the technology is now ready to move forward to benefit the traveling public.”

The test vertical tail is an actual 757 vertical tail that came out of an aircraft bone yard in Arizona. With the help of the Boeing test and evaluation team, Advanced Technologies Inc. of Newport News, Va., modified and refurbished the tail into a wind tunnel model.

The wind tunnel tests enabled the Boeing and NASA team to observe “a wide array of flow control configurations across the whole low-speed flight envelope of the vertical tail,” said Ed Whalen, Boeing Research & Technology program manager for the testing. The team will pick the most efficient and effective flow control configuration for future flight testing “to see how it performs in the real flight environment,” Whalen said.

The flight testing will be aboard the Boeing ecoDemonstrator program 757 flight test aircraft. Boeing’s ecoDemonstrator program will focus on improving environmental performance by bringing new technologies, materials and methods to implementation faster than ever before.

The combined wind tunnel and flight tests will represent the first full-scale flight demonstration of this active flow control technology, Whalen said. “That will give us insight into how the system works, how effective and efficient it is, things that we’re not completely sure of at this point.”

Active flow control involves the manipulation of a flow field – through the addition of energy — to improve the aerodynamic performance of an aircraft structure. Active flow control can enable the design of simpler, smaller and more aerodynamically efficient structures that help reduce aircraft weight, drag, and fuel consumption.




All of this week's top headlines to your email every Friday.


 
 

 
University of Rhode Island photograph by Tom Glennon

NASA kicks off field campaign to probe ocean ecology, carbon cycle

University of Rhode Island photograph by Tom Glennon The Research Vessel Endeavor is the floating laboratory that scientists will use for the ocean-going portion of the SABOR field campaign this summer. NASA embarks this week o...
 
 
NASA photograph by Carla Thomas

NASA’s high-flying laser altimeter to check out summer sea ice, more

NASA photograph by Carla Thomas This summer, the Multiple Altimeter Beam Experimental Lidar, or MABEL, will fly above Alaska and the Arctic Ocean on one of NASA’s ER-2 high-altitude aircraft. Sea ice in summer looks dramatica...
 
 
SOFIA

Outer space to inner space: SOFIA inside Lufthansa Technik hangar

NASA photograph by Jeff Doughty NASA’s Stratospheric Observatory for Infrared Astronomy is shown inside the Lufthansa Technik hangar in Hamburg, Germany where it is beginning its decadal inspection. Flight, aircraft maint...
 

 
NASA photograph by Tony Landis

New life for an old bird: NASA’s F-15B test bed gets new engines

NASA photograph NASA’s F-15B flight research test bed carries shuttle thermal insulation panels on its underbelly during a research flight in 2005. NASA Armstrong’s F-15B aeronautics research test bed, a workhorse at th...
 
 
NASA photograph by Tom Tschida

Towed glider benefits from center’s new 3-D printer capability

NASA photograph by Tom Tschida The major components of NASA Armstrong’s new high-resolution 3-D additive manufacturing printer occupy a shelf in the center’s subscale aircraft research lab. Robert “Red” ...
 
 
NASA photograph by Emmett Given

NASA completes testing on 3-D printer

NASA photograph by Emmett Given United Space Alliance engineer Cynthia Azzarita, left, and Boeing Company engineer Chen Deng, members of the Human Factors Integration Team at NASA’s Johnson Space Center, conduct a “...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>