Business

December 9, 2013

Ball Aerospace demonstrates ultra-lightweight telescope technologies for DARPA’s MOIRE program

ball-darpa
Ball Aerospace & Technologies Corp. has demonstrated unprecedented telescope technologies using ultra-lightweight polymer membrane optics.

Ball is incrementally demonstrating technology needed to deploy a large, 20-meter-diameter, lightweight space-based telescope in geosynchronous orbit as part of the Membrane Optic Imager Real-time Exploitation program, led by the Defense Advanced Research Projects Agency.

Most recently, Ball completed construction and testing of one-eighth of a 5-meter-diameter annular segmented telescope to verify functionality of the MOIRE design.

“The ground demonstration substantiates that this innovative technology could work on next generation space telescopes to greatly reduce their costs and enable larger telescopes,” said Ball Aerospace President Rob Strain.† “This technology could apply to a wide-range of applications providing various forms of information to a multitude of users.”

The lightweight optics developed under the MOIRE program reduces the mass of large aperture telescopes by† nearly an order of magnitude compared to those with conventional optics.† Since costs scale roughly with spacecraft mass, one key to affordability is minimizing the mass of future space optics.

This technology could lend itself to easily stowed configurations for launch within a payload shroud that could be deployed on orbit.

The telescope concept that Ball developed employs thin (less than 1/1,000th of an inch) transparent membranes etched with a diffraction pattern as the primary optical element used to focus light.

“This is the first design to use transparent membranes on a large scale,” said Aaron Seltzer, director of Advanced Development for Ball Aerospace’s National Defense business unit. “The result is a telescope with exceptionally low mass per unit of collecting area.”

To produce MOIRE’s optical-quality polymer membranes and the precision etching needed to generate the diffraction pattern, Ball worked with NeXolve and the Lawrence Livermore National Laboratory. The Ball demonstration telescope uses six primary diffractive optical elements. Additional technologies demonstrated by Ball for the MOIRE telescope include the use of secondary diffractive optical elements to correct chromatic dispersion (e.g. the rainbow effect visible on the reverse side of a DVD); stability of the membranes; and the use of laser metrology and active optics to align the primary and secondary optics.

Following the successful ground-based proof of concept for MOIRE, the Ball team intends to pursue additional funding to move the technology forward.




All of this week's top headlines to your email every Friday.


 
 

 

Headlines September 2, 2014

News: Debris yields clues that pilot never ejected - When investigators were finally able to safely enter the crash site of an F-15C “Eagle” fighter jet on the afternoon of Aug. 27, they made a grim discovery that concluded more than 30 hours of searching – the pilot never managed to eject from the aircraft.  ...
 
 

News Briefs September 2, 2014

Pentagon: Iraq operations cost $560 million so far U.S. military operations in Iraq, including airstrikes and surveillance flights, have cost about $560 million since mid-June, the Pentagon said Aug. 29. Rear Adm. John Kirby, the Pentagon press secretary, said the average daily cost has been $7.5 million. He said it began at a much lower...
 
 

Unmanned aircraft partnership reaches major milestone

A team of research students and staff from Warsaw University of Technology have successfully demonstrated the first phase of flight test and integration of unmanned aircraft platforms with an autonomous mission control system. The demonstration marks a significant milestone in a partnership between the university and Lockheed Martin that began earlier this year. This is...
 

 

Raytheon delivers first Block 2 Rolling Airframe Missiles to US Navy

Raytheon delivered the first Block 2 variant of its Rolling Airframe Missile system to the U.S. Navy as part of the company’s 2012 Low Rate Initial Production contract. RAM Block 2 is a significant performance upgrade featuring enhanced kinematics, an evolved radio frequency receiver, and an improved control system. “As today’s threats continue to evolve,...
 
 
Courtesy photograph

Two Vietnam War Soldiers, one from Civil War to receive Medal of Honor

U.S. Army graphic Retired Command Sgt. Maj. Bennie G. Adkins and former Spc. 4 Donald P. Sloat will receive the Medal of Honor for actions in Vietnam. The White House announced Aug. 26 that Retired Command Sgt. Maj. Bennie G. A...
 
 

Sparks fly as NASA pushes limits of 3-D printing technology

NASA has successfully tested the most complex rocket engine parts ever designed by the agency and printed with additive manufacturing, or 3-D printing, on a test stand at NASA’s Marshall Space Flight Center in Huntsville, Ala. NASA engineers pushed the limits of technology by designing a rocket engine injector – a highly complex part that...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>