Business

December 16, 2013

Pratt & Whitney opens new F100 engine overhaul facility in Columbus, Ga.

Pratt & Whitney has opened its new F100 engine overhaul facility in Columbus, Ga.

The new 105,000-square-foot facility enhances Pratt & Whitney’s capacity to service engines that power F-16 and F-15 fighter aircraft used by the U.S. Air Force and international military customers.

Pratt & Whitney, the Development Authority of Columbus and Western Devcon Inc. worked together to develop, design and build the new facility. Pratt & Whitney is a division of United Technologies Corp.

In April 2013, Pratt & Whitney announced it would move the majority of the F100 engine overhaul work performed at its San Antonio Engine Center to Columbus. Construction on the new facility began in July, with employees scheduled to begin performing F100 engine overhauls in the first quarter of 2014.

“To remain competitive and realize efficiencies, it made sense to take advantage of the engine services infrastructure we already have here in Columbus,” said Tom Bode, Columbus Engine Center general manager. “This expansion is a strategic investment for our company and will be critical to our success in the future by allowing us to centralize much of our commercial and military engine aftermarket, repair and overhaul work.”

Pratt & Whitney’s Columbus Engine Center – located 90 miles south of Atlanta – is a full-capacity, world-class jet engine maintenance facility serving commercial customers as well as the United States government. The facility is an IAE V2500 engine maintenance center of excellence and North America’s leading provider of V2500 engine overhauls. The facility also provides PW2000 engine overhaul as well as F117 engine overhaul services for the U.S. military’s C-17 Globemaster III cargo aircraft.

The Columbus Engine Center offers a variety of services including heavy maintenance, hot section refurbishment, module repair, inspection, performance enhancements and engine testing. The facility’s extensive in-house repair capability helps improve turn-around times and reduce customers’ operating costs.

Officials from the City of Columbus, Development Authority of Columbus, Greater Columbus Chamber of Commerce, and site developer Western Devcon were on hand to commemorate the new facility’s opening.

“Pratt & Whitney has had a presence in Columbus for the past 17 years, and it is gratifying to see the meaningful work they bring to our community and local economy,” Columbus Mayor Teresa Tomlinson said. “By opening this new facility, Pratt & Whitney has shown they recognize the strength of our local workforce and the value Columbus provides to its growing business.”

“Western Devcon is pleased to have jointly worked with Pratt & Whitney, Evans Construction and the Development Authority of Columbus to expand engine overhaul capabilities in Columbus,” said Mike Ibe, Western Devcon president.




All of this week's top headlines to your email every Friday.


 
 

 

Missile Defense Agency, Raytheon demonstrate SM-6’s new anti-ballistic missile defense capability

In a first-of-its-kind test, the U.S. Navy fired a Raytheon Standard Missile-6, intercepting and destroying a short-range ballistic missile target at sea. The successful U.S. Missile Defense Agency test proved a modified SM-6 can eliminate threat ballistic missiles in their final seconds of flight. “SM-6 is the only missile in the world that can do...
 
 

Northrop Grumman-developed stealthy data link validated as combat ready with U.S. Marine Corps

the U.S. Marine Corps achieving F-35B initial operating capability, the Multifunction Advanced Data Link waveform developed by Northrop Grumman has been proven a key combat-ready capability of the F-35 Lightning II program. MADL is a high-data-rate, directional communications link that allows fifth-generation aircraft to communicate and coordinate tactics covertly. During testing of the Lockhee...
 
 

Lockheed Martin technology helps pilots, UAS operators share data, stay safe

As Unmanned Aircraft Systems take to the skies, it is essential for safety that UAS operators and pilots are aware of each other. To help provide this shared situational awareness, Lockheed Martin has deployed the first components of a UAS traffic management system that is available to the UAS community now. Lockheed Martin’s online Flight...
 

 

Aegis goes four-for-four in weeklong missile test series

The Lockheed Martin, U.S. Navy and Missile Defense Agency’s Aegis Combat System took part in a successful four-event test of the combat systemís air warfare and ballistic missile defense capabilities. The Multi-mission Warfare tests, conducted aboard USS John Paul Jones (DDG 53), began July 28 and ended Aug. 1. The latest iteration of the Aegis...
 
 
Lockheed Martin photograph

Lockheed Martin successfully tests design changes for Orion

A protective panel for Orion’s service module is jettisoned during testing at Lockheed Martin’s Sunnyvale, California facility. This test series evaluated design changes to the spacecraft’s fairing separation system Lockh...
 
 

Australian company to provide parts for initial production of Triton UAS

Northrop Grumman has awarded the first Australian supplier contract for the U.S. Navy’s MQ-4C Triton unmanned aircraft system initial production lot to Ferra Engineering. Brisbane-based Ferra Engineering will manufacture mechanical sub-assemblies for the first four Triton air vehicles including structural components. “At Northrop Grumman it’s very important to not only develop...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>