Tech

January 29, 2014

NASA ramps up space launch system sound suppression testing

https://www.youtube.com/watch?v=bKAkvXYg47Q&feature=player_embedded

The first round of acoustic tests on a scale model of NASA’s Space Launch System is underway. The tests will allow engineers to verify the design of the sound suppression system being developed for the agency’s new deep space rocket.

The testing, which began Jan. 16 at NASA’s Marshall Space Flight Center in Huntsville, Ala., will focus on how low- and high-frequency sound waves affect the rocket on the launch pad. This testing will provide critical data about how the powerful noise generated by the engines and boosters may affect the rocket and crew, especially during liftoff.

“We can verify the launch environments the SLS vehicle was designed around and determine the effectiveness of the sound suppression systems,” said Doug Counter, technical lead for the acoustic testing. “Scale model testing on the space shuttle was very.

During the tests, a 5-percent scale model of the SLS is ignited for five seconds at a time while microphones, located on the vehicle and similarly scaled mobile launcher, tower and exhaust duct, collect acoustic data. A thrust plate, side restraints and cables keep the model secure.

Engineers are running many of the evaluations with a system known as rainbirds, huge water nozzles on the mobile launcher at NASA’s Kennedy Space Center in Florida. During launch, 450,000 gallons of water will be released from five rainbirds just seconds before booster ignition. Water is the main component of the sound suppression system because it helps protect the launch vehicle and its payload from damage caused by acoustical energy. SLS with NASA’s new Orion spacecraft on top will be launched from Kennedy on deep space missions to destinations such as an asteroid and Mars.

A series of acoustics tests also is taking place at the University of Texas at Austin. Engineers are evaluating the strong sounds and vibrations that occur during the ignition process for the RS-25 engines that will power SLS.

First to be tested is the rocket’s core stage, which houses many of the launch vehicle’s critical pieces including the flight computer and avionics. The test of the fully assembled vehicle, which will include the solid rocket motors, will be conducted later this year.

The SLS core stage model has four liquid oxygen-hydrogen thrusters that simulate the four RS-25 engines built by Aerojet Rocketdyne of Canoga Park, Calif. Two Alliant Techsystems Inc. (ATK) Rocket Assisted Take-Off motors represent the five-segment solid rocket motors on SLS. ATK, based in Promontory, Utah, is building the boosters. The motors burn similarly to how a solid motor would burn for the initial SLS vehicle configuration.

The first flight test of the SLS in 2017 will be configured for a 70-metric-ton (77-ton) lift capacity and carry an uncrewed Orion spacecraft beyond low-Earth orbit to test the performance of the integrated system. As the SLS is evolved, it will the most powerful rocket ever built and provide an unprecedented lift capability of 130 metric tons (143 tons) to enable missions even farther into our solar system.

For video of the scale model acoustics testing and more information on SLS, visit:
http://www.nasa.gov/sls




All of this week's top headlines to your email every Friday.


 
 

 

Headlines September 2, 2014

News: Debris yields clues that pilot never ejected - When investigators were finally able to safely enter the crash site of an F-15C “Eagle” fighter jet on the afternoon of Aug. 27, they made a grim discovery that concluded more than 30 hours of searching – the pilot never managed to eject from the aircraft.  ...
 
 

News Briefs September 2, 2014

Pentagon: Iraq operations cost $560 million so far U.S. military operations in Iraq, including airstrikes and surveillance flights, have cost about $560 million since mid-June, the Pentagon said Aug. 29. Rear Adm. John Kirby, the Pentagon press secretary, said the average daily cost has been $7.5 million. He said it began at a much lower...
 
 

Unmanned aircraft partnership reaches major milestone

A team of research students and staff from Warsaw University of Technology have successfully demonstrated the first phase of flight test and integration of unmanned aircraft platforms with an autonomous mission control system. The demonstration marks a significant milestone in a partnership between the university and Lockheed Martin that began earlier this year. This is...
 

 

Raytheon delivers first Block 2 Rolling Airframe Missiles to US Navy

Raytheon delivered the first Block 2 variant of its Rolling Airframe Missile system to the U.S. Navy as part of the company’s 2012 Low Rate Initial Production contract. RAM Block 2 is a significant performance upgrade featuring enhanced kinematics, an evolved radio frequency receiver, and an improved control system. “As today’s threats continue to evolve,...
 
 
Courtesy photograph

Two Vietnam War Soldiers, one from Civil War to receive Medal of Honor

U.S. Army graphic Retired Command Sgt. Maj. Bennie G. Adkins and former Spc. 4 Donald P. Sloat will receive the Medal of Honor for actions in Vietnam. The White House announced Aug. 26 that Retired Command Sgt. Maj. Bennie G. A...
 
 

Sparks fly as NASA pushes limits of 3-D printing technology

NASA has successfully tested the most complex rocket engine parts ever designed by the agency and printed with additive manufacturing, or 3-D printing, on a test stand at NASA’s Marshall Space Flight Center in Huntsville, Ala. NASA engineers pushed the limits of technology by designing a rocket engine injector – a highly complex part that...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>