Defense

January 29, 2014

U.S., Canada partner to upgrade Canadian howitzer

Tags:
Audra Calloway
Picatinny Arsenal, N.J.

Kenneth Whitnall, Canadian Army Life Cycle material manager for 105 mm Howitzer Fleets, explains to members of the Armament Research, Development and Engineering Center how to conduct maintenance on the C3 Howitzer.

The Canadian Army has enlisted the help of Picatinny engineers to evaluate the life-span of their World War II-era C3 Howitzer.

“We are looking for engineering data that, unfortunately, we’re missing right now,” said Canadian Army Maj. David Lebel, Equipment Management team leader for Field Artillery Systems.

The C3 Howitzer is a 1950′s technology that the Canadian Army is trying to keep in service for ten or 11 more years.

“The fleet is now about 60 years old, and after it was modified to fit Canadian needs, we didn’t think at that time to have the contractor provide engineering data – to check the rail forces or validate the forces that are applied to the structure, either while it’s firing or while it’s being towed,” Lebel explained.

“Now that it’s been around for 60 years, we’re starting to experience a few cracks here and there, but we can’t explain how these cracks are being made. We need to be able to find solutions without having to ground the fleet for a long amount of time.”

The Canadian Army uses the C3 howitzers for training, although they use the 155 mm M777 in combat. The operation procedures for towed howitzers are similar, but 105 mm ammunition is cheaper than 155 mm ammunition.

“We take a lot of time to train before going into operations, so this reduces cost,” Lebel said.

Avalanche control

In addition to training purposes, the C3 is also used for avalanche control in the snow-covered Canadian mountains.

“There’s a stretch of highway in the (Canadian) Rockies called Rogers Pass, which is in Glacier National Park,” Lebel explained.

“Because of the mountains’ elevation, there’s about 300 inches of snow during winter, and it’s very prone to avalanches,” Lebel said. “We’ve got a detachment from the Royal Canadian Artillery with [C3 Howitzers] ready to support Parks Canada in managing the dangers on the main road of Roger’s pass. Once Parks Canada gives us the go ahead, we shoot to stabilize the area, which means sometimes we do create an avalanche so that we can shovel the snow out.”

Discovering deficiencies

Picatinny’s Program Executive Office Ammunition, known as PEO Ammo, employees, with help from Armament Research, Development and Engineering Center, or ARDEC, engineers, is conducting an analysis of the stresses of the C3 Howitzer in order to support the howitzer’s life cycle, said Luke Helsel, ARDEC’s C3 Evaluation team lead.

The team will conduct a series of tests over the next year to determine potential problems that could occur throughout the system.

“We’re going to do analysis to help the Canadian Army find those problems in advance,” said Helsel. “It helps them better predict areas to target for inspections or to perform upgrades. Sometimes that can be a challenge when looking at a design that was done years ago, and has no support from the original contractor.”

The data packages for the howitzer are from the 1940s, and they have been updated through the 1980s, but there’s no subject matter expert to refer to for questions.

“It’s fascinating to look at the older style of design, and to see what we can do to support them maintain their fleet for the next couple of years,” said Helsel. “Some of these slick things they did back then are good to look at now. The old design can inspire us for modern work and working on this project we can discover new analysis techniques that we can use here for the M119 or M777.”
A gun was recently shipped to Aberdeen Proving Ground, Md., for mobility trials. In April, it will be transferred to Yuma Proving Ground, Ariz., for firing trials.

At Aberdeen, engineers will instrument the gun with strain gauges to measure the amount the metal is being pulled while towing the gun. The gun will also be towed around a series of courses over hills and other terrain while recording data from the gauges.

“Then, using that data, we can predict virtually what the strain is throughout the whole carriage,” said Hesel. “After that, we can come back and figure out where we think the other high strain areas are and perform another test to confirm our analysis.”

At Yuma, engineers will do similar testing while firing the howitzers at different elevations and azimuths.

“This will give us the engineering technical argument to pursue the direction we need to,” Lebel said. “Hopefully, we’ll be able to find a few simple, small fixes to extend the lifecycle without having to re-engineering big assemblies on the gun.”

The Canadian Army currently has almost 100 deployed across Canada, and the process for replacing the howitzers with newer models could take up to two decades.

“We can’t stop every unit from training six months while we’re scratching our heads trying to decide how to solve the problem. So by giving us the technical data that we’re looking for, ARDEC is really making our job that much more easy either to do preventive maintenance that’s much more accurate on potential failure locations. And should there be a failure, they’ll be enough engineering data to put together a solution that won’t take us four or five months to get to.”

“At this point, we know there are problems, but I don’t think there’s going to be one solution to fix them all. We’re gonna have to choose the problem that’s the most risky and go about it in a deliberate fashion. But there could be many conclusions,” Lebel said.

Friendly relations

“The reason Canada came to us is that we have a great working relationship,” said David Wong, Foreign Military Sales manager for PEO Ammo’s Project Manager Towed Artillery Systems.

“Canada purchased 37 of our M777 155mm howitzers, so they know us and the capabilities and resources we have. This project extends the good working relationship we’ve had for seven years,” Wong said.

In addition, the Department of National Defence, especially the Director of Armament Sustainment Program Management, has benefited on several aspects of howitzer maintenance and support from both Project Manager Towed Artillery Systems expertise and Picatinny’s resources, Lebel added.

Picatinny also recently updated their M119 Howitzer fleet, which required similar data collection and engineering processes.




All of this week's top headlines to your email every Friday.


 
 

 

Headlines July 28, 2014

News: U.S. has lost track of weapons given to Afghanistan - The United States supplied almost three quarter of a million weapons to Afghanistan’s army and police since 2004, but the military cannot track where many of those arms have gone, a new report found. Bill to improve VA has $17 billion price tag - A bipartisan...
 
 

News Briefs July 28, 2014

Marines seek authorization for dolphin deaths The Marine Corps is asking for a five-year authorization from the National Marine Fisheries Service for incidental deaths of bottlenose dolphins during training exercises at a bombing and target range. The Sun Journal of New Bern, N.C., reports that Connie Barclay of the National Oceanic and Atmospheric Administration says...
 
 
Army photograph by David Vergun

Senior leaders explain Army’s drawdown plan

Army photograph by David Vergun No commander is happy when notified that a soldier from his or her command has been identified for early separation. But commanders personally notify those Soldiers and ensure participation in th...
 

 

Northrop Grumman awarded mission support services contract

The U.S. Army awarded Northrop Grumman a cost-plus-fixed-fee contract, with a potential value of $205 million, to continue providing mission logistics services in support of combat brigades training at the National Training Center in Fort Irwin, Calif. The contract covers one base year and two one-year options. Support will include the full range of mission...
 
 
Lockheed Martin photograph by Beth Groom

F-35 Rollout Marks U.S.-Australia Partnership Milestone

Lockheed Martin photograph by Beth Groom Royal Australian Air Force Air Marshal Geoff Brown delivers his remarks at the roll out ceremony for Australia’s first F-35. The official rollout of the first two F-35 Lightning II...
 
 
NASA/JPL-Caltech image

NASA’s Mars spacecraft maneuvers to prepare for close comet flyby

NASA/JPL-Caltech image This graphic depicts the orbit of comet C/2013 A1 Siding Spring as it swings around the sun in 2014. On Oct. 19, the comet will have a very close pass at Mars. Its nucleus will miss Mars by about 82,000 m...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>