Defense

March 14, 2014

Tobyhanna lands Gray Eagle Ground Control Station repairs

Tags:
Justin Eimers
Tobyhanna Army Depot, Penn.

Repairs on the Ground Control Stations for Gray Eagle (MQ-1C) Unmanned Aircraft Systems are scheduled to begin at Tobyhanna Army Depot in fiscal year 2016.

The Army, Marine Corps, Air Force and Navy have named Tobyhanna Army Depot as the Depot Source of Repair for the Gray Eagle (MQ-1C) Unmanned Aircraft System Ground Control Stations.

The decision by the four services’ Maintenance Inter-service Support Management Offices recognizes the depot as the installation best suited for these repairs.

“Through the acquisition process, there is a lot of assessment that takes place, including core logistics analyses that look at our capabilities,” said Nick Caprioli, chief of the Business Development Division. “Tobyhanna was selected based on infrastructure, training and technical expertise for this type of work.”

Repairs for the new workload will begin in fiscal year 2016, with 19 Ground Control Stations, or GCSs, scheduled per year, totaling more than 75 systems through fiscal year 2018.

The Gray Eagle system is a long-range, high-altitude Unmanned Aircraft System, or UAS, that provides the capability to perform wide-area reconnaissance, surveillance and target acquisition. It is also capable of relaying communications and can be equipped for attack missions. The system consists of the aircraft, GCS, data terminals and data links. Each GCS controls one Gray Eagle aircraft and is used by the operator to perform command and control, payload control and weapon launch operations.

Due to their complexity, Gray Eagle systems and components are currently replaced rather than repaired, exhausting money and resources. Depot personnel are developing cost-effective solutions to repair GCSs and increase capability. Tobyhanna recognizes that the assignment of this Depot Source of Repair, or DSOR, will enable the depot to be selected for additional DSORs for UAS equipment.

Katlin Edmunds, business development specialist, noted that revamping the DSOR decision process will also help substantially reduce costs and bring more UAS work to the depot.

“DSOR selection helps ensure effective use of commercial and organic depot maintenance resources,” she said. “We have been aggressively trying to streamline processes, find inefficiencies and figure out the best way to accommodate new UAS workloads.”

Based on trends in the market, business management analysts anticipate that UAS will be the depot’s largest commodity in the future. As the only Army depot involved in the Integrated Product Team, or IPT, for Air Force and Army UAS, Tobyhanna is well positioned to receive workloads for additional UAS component repairs. The IPT is working with Tobyhanna to identify the need for any new test equipment, facilitation or training necessary for additional UAS work.

“Part of the planning process to bring in this workload is to have our engineers work with the program offices to make sure our capabilities are sufficient to provide the best solution for everybody involved,” said Caprioli. “The depot’s all-hands-on-deck approach to secure this DSOR selection has helped increase our marketability and should open doors for future UAS workloads.”

Tobyhanna Army Depot is a recognized leader in providing world-class logistics support for Command, Control, Communications, Computers, Intelligence, Surveillance and Reconnaissance, also known as C4ISR, Systems across the Department of Defense.

Tobyhanna’s Corporate Philosophy, dedicated work force and electronics expertise ensure the depot is the Joint C4ISR provider of choice for all branches of the Armed Forces and industry partners. Tobyhanna’s unparalleled capabilities include full-spectrum support for sustainment, overhaul and repair, fabrication and manufacturing, engineering design and development, systems integration, technology insertion, modification, and global field support to war fighters.

About 3,500 personnel are employed at Tobyhanna, which is located in the Pocono Mountains of northeastern Pennsylvania. Tobyhanna Army Depot is part of the U.S. Army Communications-Electronics Command. Headquartered at Aberdeen Proving Ground, Md., the command’s mission is to research, develop, acquire, field and sustain communications, command, control computer, intelligence, electronic warfare and sensors capabilities for the Armed Forces.




All of this week's top headlines to your email every Friday.


 
 

 

Headlines December 17, 2014

News: U.S. Air Force tanker platform slated for year-end debut - Boeing is planning for first flight of its 767-2C – upon which the U.S. Air Force’s new KC-46 tanker will be based – by year’s end, six months late. Northrop Grumman wins $657.4 million deal to supply drones to South Korea - Northrop Grumman has won...
 
 

NASA launches new Micro-g NExT for undergraduates

NASA is offering undergraduate students an opportunity to participate in a new microgravity activity called Micro-g Neutral Buoyancy Experiment Design Teams. The deadline for proposals is Jan. 28, 2015. Micro-g NExT challenges students to work in teams to design and build prototypes of spacewalking tools to be used by astronauts for spacewalk training in the...
 
 
launch1

Storm fails to quench liftoff of secret reconnaissance satellite

The fiery launch of an Atlas V (541), among the most powerful of the venerable Atlas family, briefly dispelled the gloom over Californiaís Central Coast on the evening of Dec. 12. A team of personnel from United Launch Allianc...
 

 
Coast Guard photograph

Navy demonstrates unmanned helicopter operations aboard Coast Guard cutter

http://static.dvidshub.net/media/video/1412/DOD_102145893/DOD_102145893-512×288-442k.mp4 Coast Guard photograph An MQ-8B Fire Scout UAS is tested off the Coast Guard Cutter Bertholf near Los Angeles, Dec. 5 2014. The Coast...
 
 
GPS-OCX

GPS III, OCX successfully demonstrate key satellite command, control capabilities

Lockheed Martin and Raytheon successfully completed the fourth of five planned launch and early orbit exercises to demonstrate new automation capabilities, information assurance and launch readiness of the worldís most powerfu...
 
 

Aerojet Rocketdyne successfully demonstrates 3D printed rocket propulsion system for satellites

Aerojet Rocketdyne has successfully completed a hot-fire test of its MPS-120 CubeSat High-Impulse Adaptable Modular Propulsion System. The MPS-120 is the first 3D-printed hydrazine integrated propulsion system and is designed to provide propulsion for CubeSats, enabling missions not previously available to these tiny satellites. The project was funded out of the NASA Office of Chief...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>