Defense

March 24, 2014

Unmanned vehicle demonstration showcases leap-ahead technology

VIP’s watched the Autonomous Mobility Appliqué System demonstration from the top of a building in the BOAZ Military Operations in Urban Terrain training site at Fort Hood, Texas.

Working closely with Lockheed Martin and a conglomeration of Army technology, acquisition and user community stakeholders, the U.S. Army Tank Automotive Research Development and Engineering Center successfully demonstrated an unmanned military convoy Jan. 14 at Fort Hood, Texas.

From a rooftop in the Fort Hood training area, military and industry VIPs saw firsthand how the Autonomous Mobility Appliqué System, or AMAS, enabled two driverless Palletized Loading System prime movers and an M915 tractor trailer truck to seamlessly interact with a manned Humvee gun truck escort. The convoy negotiated oncoming traffic, followed rules of the road, recognized and avoided pedestrians and various obstacles, and then used intelligence and decision-making abilities to re-route their direction through a maze of test areas to complete both complex urban and rural line haul missions.

As the ground systems expert within the U.S. Army Research, Development and Engineering Command, TARDEC develops, integrates and sustains the right technology solutions to address ever-changing threats and shifts in strategic, technological and fiscal environments. Flexibility and adaptability are vital to future systems, and AMAS is designed to provide a wide range of military vehicle platforms with optionally-manned capabilities that will increase safety and provide the warfighter with additional flexibility.

During the Autonomous Mobility Applique’ System demo, VIP’s saw autonomous vehicles negotiate live traffic, follow the rules of the road, recognize pedestrians and avoid various obstacles in both urban and rural test areas.

“We’re not looking to replace Soldiers with robots. It’s about augmenting and increasing capability,” said Col. Chris Cross, chief of Science and Technology at the Army Capabilities Integration Center.

Equipped with GPS, Light Detecting and Ranging systems, known as LIDAR, Automotive radar, a host of sensors and other high-tech hardware and software components, the common appliqué kit’s intelligence and autonomous decision-making abilities can be installed in practically any military vehicle, transforming an ordinary vehicle into an optionally manned version.

AMAS can also keep personnel out of harm’s way and provide Soldiers on manned missions with increased situational awareness and other safety benefits. For instance, AMAS also features collision mitigation braking, lane-keeping assist and a roll-over warning system, electronic stability control and adaptive cruise control. During manned missions, these additional safety features could theoretically increase Soldier performance. The robotic mode frees up the vehicle crew to more closely watch for enemy threats, while still leaving them the option of manually taking control of the vehicle when necessary.

A soldier from 3rd Cavalry Regiment programs an autonomous convoy using the Autonomous Mobility Appliqué System.

“The AMAS hardware and software performed exactly as designed and dealt successfully with all of the real-world obstacles that a real-world convoy would encounter,” said AMAS Program Manager David Simon, with Lockheed Martin Missiles and Fire Control.

AMAS development aligns with Army goals for the Future Force. At an Association of the United States Army breakfast in Arlington, Va., Jan. 23, Army Chief of Staff Gen. Raymond Odierno talked about the Army Modernization Strategy and the difficult decisions ahead.

“What is that leap-ahead technology that we need that could make a real difference for our Soldiers on the ground?” Odierno asked. “What is the technology that allows us to decrease the weight so we can be more expeditionary? I need tactical mobility for the future. We need to move towards mobility and try to determine how we sustain survivability while increasing mobility.”

In his just-released CSA Strategic Priorities, Odierno added that we must prioritize Soldier-centered modernization and procurement of proven technologies so that Soldiers have the best weapons, equipment and protection to accomplish the mission.

Another AMAS demonstration with more vehicles and more complex notional scenarios is scheduled for later this year.

“We are very happy with the results, but the AMAS must undergo more testing before it becomes deployable,” said TARDEC AMAS Lead Engineer Bernard Theisen.

The U.S. Army Tank Automotive Research Development and Engineering Center and Lockheed Martin partnered with U.S. Central Command, Army Capabilities Integration Center, Combined Arms Support Command, and the 3rd Cavalry Regiment, to demonstrate an autonomy-enabled technology that can help distance our warfighters from dangerous threats during convoy operations. On Jan. 14, 2014, they demonstrated the Autonomous Mobility Applique’ System and conducted an autonomous convoy at Fort Hood, Texas.

“The vehicles and systems are replaceable, but nothing can replace the life of a Soldier. These systems keep Soldiers safe and make them more efficient,” he said.

TARDEC is the ground systems expert within RDECOM. It provides engineering and scientific expertise for Department of Defense manned and autonomy-enabled ground systems and ground support systems; serves as the nation’s laboratory for advanced military automotive technology; and provides leadership for the Army’s advanced Science and Technology research, demonstration, development and full life cycle engineering efforts.




All of this week's top headlines to your email every Friday.


 
 

 

Headlines December 17, 2014

News: U.S. Air Force tanker platform slated for year-end debut - Boeing is planning for first flight of its 767-2C – upon which the U.S. Air Force’s new KC-46 tanker will be based – by year’s end, six months late. Northrop Grumman wins $657.4 million deal to supply drones to South Korea - Northrop Grumman has won...
 
 

NASA launches new Micro-g NExT for undergraduates

NASA is offering undergraduate students an opportunity to participate in a new microgravity activity called Micro-g Neutral Buoyancy Experiment Design Teams. The deadline for proposals is Jan. 28, 2015. Micro-g NExT challenges students to work in teams to design and build prototypes of spacewalking tools to be used by astronauts for spacewalk training in the...
 
 
launch1

Storm fails to quench liftoff of secret reconnaissance satellite

The fiery launch of an Atlas V (541), among the most powerful of the venerable Atlas family, briefly dispelled the gloom over Californiaís Central Coast on the evening of Dec. 12. A team of personnel from United Launch Allianc...
 

 
Coast Guard photograph

Navy demonstrates unmanned helicopter operations aboard Coast Guard cutter

http://static.dvidshub.net/media/video/1412/DOD_102145893/DOD_102145893-512×288-442k.mp4 Coast Guard photograph An MQ-8B Fire Scout UAS is tested off the Coast Guard Cutter Bertholf near Los Angeles, Dec. 5 2014. The Coast...
 
 
GPS-OCX

GPS III, OCX successfully demonstrate key satellite command, control capabilities

Lockheed Martin and Raytheon successfully completed the fourth of five planned launch and early orbit exercises to demonstrate new automation capabilities, information assurance and launch readiness of the worldís most powerfu...
 
 

Aerojet Rocketdyne successfully demonstrates 3D printed rocket propulsion system for satellites

Aerojet Rocketdyne has successfully completed a hot-fire test of its MPS-120 CubeSat High-Impulse Adaptable Modular Propulsion System. The MPS-120 is the first 3D-printed hydrazine integrated propulsion system and is designed to provide propulsion for CubeSats, enabling missions not previously available to these tiny satellites. The project was funded out of the NASA Office of Chief...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>