Business

May 14, 2014

UTC Aerospace Systems to continue development of a UUV energy-dense PES propulsion system

UTC Aerospace Systems has been selected by the Office of Naval Research to proceed with the next phases of the Long Endurance Undersea Vehicle Propulsion energy program.

During these follow-on phases, UTC Aerospace Systems (formerly Hamilton Sundstrand) will continue the design and development of a Proton Exchange Membrane based Fuel Cell Energy System for a 21-inch diameter Unmanned Undersea Vehicle.

The work will be performed by the company’s ISR and Space Systems team.  UTC Aerospace Systems is a unit of United Technologies Corp.

The PES would replace existing battery systems, providing greater range and operational flexibility to the U.S. Navy.  The overall objective of the program is completion of a TRL (technology readiness level) 6 demonstration.  In the recently completed phase, the system operated successfully for over 30 hours using an integrated cryogenic reactant system and fuel cell power plant to provide 42 kWh of total energy over a power range of 100 to 3800 watts.  Major features include a qualified fuel cell stack design, simple balance of plant and dense reactant storage. This simple system architecture is a safe, reliable and affordable solution for a 21-inch diameter vehicle which is scalable to larger displacement UUVs and enables the broad range of operational capability needed for future autonomous underwater vehicle missions.

“The fuel cell hardware design selected for the LEUVP program is identical to that being used for our qualified Fuel Cell Power Module on the Spanish Navy’s S-80 submarine,” said G. Allen Flynt, general manager, Space Systems, UTC Aerospace Systems.  “With this heritage we feel that we are well-placed with our partners to deliver a proven option to ONR and the U.S. Navy on this program.”

UTC Aerospace Systems designs, manufactures and services integrated systems and components for the aerospace and defense industries. UTC Aerospace Systems supports a global customer base with significant worldwide manufacturing and customer service facilities.




All of this week's top headlines to your email every Friday.


 
 

 
GPS-OCX

GPS III, OCX successfully demonstrate key satellite command, control capabilities

Lockheed Martin and Raytheon successfully completed the fourth of five planned launch and early orbit exercises to demonstrate new automation capabilities, information assurance and launch readiness of the worldís most powerfu...
 
 

Aerojet Rocketdyne successfully demonstrates 3D printed rocket propulsion system for satellites

Aerojet Rocketdyne has successfully completed a hot-fire test of its MPS-120 CubeSat High-Impulse Adaptable Modular Propulsion System. The MPS-120 is the first 3D-printed hydrazine integrated propulsion system and is designed to provide propulsion for CubeSats, enabling missions not previously available to these tiny satellites. The project was funded out of the NASA Office of Chief...
 
 

Boeing breaks ground in St. Louis for new composites center

Boeing Dec. 16 began construction in St. Louis of a new 367,000-square-foot facility in which it will build parts for the newest member of its 777 commercial airplanes family, the 777X.  About 700 new jobs will be created for the 777X work. Construction should be complete in 2016, with work on 777X wing and empennage...
 

 

Raytheon, Bell conduct first missile launch from V-22

Raytheon and Bell Helicopter have completed two successful launches of the Griffin B missile from a Bell Boeing V-22 Osprey multi-mission aircraft at Yuma Proving Ground, Ariz. As an industry funded effort with Bell’s Xworx, Raytheon demonstrated the simplicity of integrating the Griffin B missile onto the V-22 platform. “This is the first time a...
 
 

Raytheon gallium nitride technology validated for space applications

Satellites may soon carry Raytheon’s Gallium Nitride technology into Earth orbit. Raytheon has successfully validated its GaN Monolithic Microwave Integrated Circuit technology for use in space-bound equipment. Raytheon GaN MMICs, fabricated at its Andover, Massachusetts foundry, demonstrated the radiation hardness required for space through Single Event Burn-out and Total Ionizing Dose t...
 
 
Air Force photograph by A1C Alexander Guerrero

317th AG delivers during massive JFE

Air Force photograph by A1C Alexander Guerrero Eleven C-130H Herculesí from various Air National Guard units and thirteen C-130J Super Herculesí from the 317th Airlift Group at Dyess Air Force Base, Texas, prepare to take off...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>