Space

July 3, 2014

ATK provides propulsion, structure for test of new technologies to land larger payloads on Mars

The Core Structure Assembly for the Low-Density Supersonic Decelerator, manufactured by ATK Space Components in San Diego, Calif.

ATK supported NASA June 28 as it moved one step closer to landing advanced payloads on Mars following the successful test of a next generation braking system.

A world-leading producer of rocket motors, ATK provided both the rocket motor and test vehicle backbone for the test of NASA’s experimental Low-Density Supersonic Decelerator.

During the June 28 test at the Pacific Missile Range Facility at Barking Sands, Kauai, Hawaii, a balloon carried the test vehicle from the Navy test range to an altitude of about 120,000 feet. At 11:05 a.m. local time, the LDSD test vehicle dropped away from the balloon and the ATK STAR 48B motor ignited to accelerate the vehicle to more than Mach 3.8 and an altitude of over 180,000 feet.

The flight test simulated the low pressure and punishing speeds experienced by payloads dropped into the Mars atmosphere. ATK’s STAR 48B rocket motor provided the axial propulsion for the test, while the ATK-manufactured Core Structure Assembly served as the platform for two breakthrough technologies from NASA’s Jet Propulsion Laboratory: an inflatable Kevlar® tube around the vehicle, called the Supersonic Inflatable Aerodynamic Decelerator, and a mammoth parachute called the Supersonic Disk Sail Parachute. These new drag devices will pave the way for delivery of increasingly larger payloads to the surface of Mars.

The STAR 48B Rocket Motor, manufactured by ATK Missile Defense & Controls in Elkton, Md.

“ATK has long supported JPL and its missions to Mars,” said Cary Ralston, vice president and general manager of ATK’s Missile Products division. “ATK was an integral part of the team for Mars Pathfinder and Mars Exploration Rover, providing propulsion for the Delta II launch vehicle, and retro rockets and gas generators for the entry, descent and landing system used to safely deliver the rovers to the surface of Mars.”

The STAR 48B propulsion system was produced at the ATK facility in Elkton, Md. The CSA for the LDSD test vehicle was developed and built at ATK’s Space Components facility in San Diego, Calif. The CSA incorporates new design features required to handle the massive loads associated with deployment of the drag devices. Among other applications, this new drag technology will enable delivery of the supplies and materials needed for long-duration missions to the red planet.

While the LDSD team expects to learn a great deal from this test, NASA has two more saucer-shaped test vehicles forthcoming, with plans to test them in the summer of 2015.




All of this week's top headlines to your email every Friday.


 
 

 
Image courtesy of NASA/JPL-Caltech

NASA’s WISE spacecraft discovers most luminous galaxy in universe

Image courtesy of NASA/JPL-Caltech This artist’s concept depicts the current record holder for the most luminous galaxy in the universe. The galaxy, WISE J224607.57-052635.0, is erupting with light equal to more than 300 ...
 
 

Air Force launches hush-hush mini-shuttle into space

A mysterious space plane rocketed into orbit May 20, carrying no crew but a full load of technology experiments. The Air Force launched its unmanned mini-shuttle late morning, May 20. An Atlas V rocket lifted it up and out over the Atlantic. This is the fourth flight for the military research program, which is shrouded...
 
 
Image courtesy NASA TV

Critical NASA research returns to Earth aboard U.S. SpaceX Dragon spacecraft

Image courtesy NASA TV The SpaceX Dragon cargo spacecraft was released from the International Space Station’s robotic arm at 7:04 a.m., EDT, May 21. The capsule then performed a series of departure burns and maneuvers to ...
 

 

NASA, Canadian agency renew agreement to reduce aviation icing risks

On hand to sign the renewal agreement May 21 at the NRC offices in Ottawa, Ontario, were Jaiwon Shin, associate administrator of NASA’s Aeronautics Research Mission Directorate in Washington, and Ian Potter, the NRC’s vice-president of engineering. “The combined efforts of our two agencies will help solve some of the most difficult and challenging weather-related...
 
 
ULA photograph

Space and Missile Systems Center successfully launches the AFSPC-5 mission

ULA photograph An Atlas V rocket successfully launches the AFSPC-5 mission from Cape Canaveral Air Force Station, Fla., May 20, 2015.   The Air Force and its mission partners successfully launched the AFSPC-5 mission aboar...
 
 

NASA’s CubeSat initiative aids in testing of technology for solar sails in space

With help from NASA, a small research satellite to test technology for in-space solar propulsion launched into space May 20 aboard an Atlas V rocket from Cape Canaveral Air Force Station, Fla., as part of the agency’s CubeSat Launch Initiative. The Atlas V sent the U.S. Air Force’s X-37B space plane on its fourth mission,...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>