Space

July 18, 2014

NASA begins engine test project for space launch system rocket

RS-25 rocket engine No. 0525 is positioned onto the A-1 Test Stand at NASAís Stennis Space Center in Mississippi preparation for a series of developmental tests.

Engineers have taken a crucial step in preparing to test parts of NASA’s Space Launch System rocket that will send humans to new destinations in the solar system.

They installed July 17 an RS-25 engine on the A-1 Test Stand at the agency’s Stennis Space Center near Bay St. Louis, Miss.

The Stennis team will perform developmental and flight certification testing of the RS-25 engine, a modified version of the space shuttle main engine that powered missions into space from 1981 to 2011.† The SLS’s core stage will be powered by a configuration of four RS-25 engines, like the one recently installed on the A-1 stand.

“This test series is a major milestone because it will be our first opportunity to operate the engine with a new controller and to test propellant inlet conditions for SLS that are different than the space shuttle,” said Steve Wofford, SLS Liquid Engines Element manager. “This testing will confirm the RS-25 will be successful at powering SLS.”

Early tests on the engine will collect data on the performance of its new advanced engine controller and other modifications. The controller regulates valves that direct the flow of propellant to the engine, which determines the amount of thrust generated during an engine test, known as a hotfire test. In flight, propellant flow and engine thrust determine the speed and trajectory of a spacecraft. The controller also regulates the engine startup sequence, which is especially important on an engine as sophisticated as the RS-25. Likewise, the controller determines the engine shutdown sequence, ensuring it will proceed properly under both normal and emergency conditions.

“Installation of RS-25 engine No. 0525 signals the launch of another major rocket engine test project for human space exploration on the A-1 Test Stand,” said Gary Benton, RS-25 rocket engine test project manager at Stennis.

The SLS is designed to carry astronauts in NASA’s Orion spacecraft deeper into space than ever before, to destinations including an asteroid and Mars. NASA is using existing and in-development hardware and infrastructure, including the RS-25 engine, to the maximum extent possible to enable NASA to begin deep space missions sooner.

Testing of engine No. 0525 begins in the coming weeks on a test stand originally built in the 1960s for Apollo-era engines that helped launch the lunar missions. The stand has since been used for several major testing projects, and NASA spent almost a year modifying the structure to accommodate the RS-25 engine.

The SLS Program is managed at NASA’s Marshall Space Flight Center in Huntsville, Ala. Aerojet Rocketdyne of Sacramento, Calif., is on contract with NASA to adapt the RS-25 engines for SLS missions.




All of this week's top headlines to your email every Friday.


 
 

 
ULA photograph

Space and Missile Systems Center successfully launches the AFSPC-5 mission

ULA photograph An Atlas V rocket successfully launches the AFSPC-5 mission from Cape Canaveral Air Force Station, Fla., May 20, 2015.   The Air Force and its mission partners successfully launched the AFSPC-5 mission aboar...
 
 

NASA’s CubeSat initiative aids in testing of technology for solar sails in space

With help from NASA, a small research satellite to test technology for in-space solar propulsion launched into space May 20 aboard an Atlas V rocket from Cape Canaveral Air Force Station, Fla., as part of the agency’s CubeSat Launch Initiative. The Atlas V sent the U.S. Air Force’s X-37B space plane on its fourth mission,...
 
 
nasa-habitat

NASA challenges designers to construct habitat for deep space exploration

NASA and the National Additive Manufacturing Innovation Institute, known as America Makes, are holding a new $2.25 million competition to design and build a 3-D printed habitat for deep space exploration, including the agencyí...
 

 

NASA seeks additional information for ARM spacecraft

NASA has issued a Request for Information seeking ideas from American companies for a spacecraft design that could be used for both the agency’s Asteroid Redirect Mission and a robotic satellite servicing mission in low-Earth orbit. In the early-2020s NASA plans to launch the Asteroid Redirect Mission, which will use a robotic spacecraft to capture...
 
 
NASA photograph by Emmett Given

NASA names winners of student launch challenge

NASA photograph by Emmett Given Vanderbilt University of Nashville, Tenn., won top prize in the 2015 NASA Student Launch challenge near NASA Marshall’s Space Flight Center in Huntsville, Ala. For the third year in a row, Vand...
 
 
LM-orion

Orion test lab mockup for next flight finished

The construction of an Orion crew module and crew module adapter full-scale mockup has been completed at the Lockheed Martin Littleton, Colo., facility. This mockup was transferred to the Orion Test Lab May 13, 2015 where engin...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>