Business

November 20, 2015
 

Dassault Falcon Jet completes new Little Rock expansion

Dassault Aviation photograph

Dassault Falcon Jet has completed another major expansion of its Little Rock Completion Center that will add 350,000 square feet of production space to the Arkansas facility.
The centerpiece of the $60 million project is a new 250,000 square foot hangar earmarked for Dassault’s latest two models — the Falcon 8X ultra long range trijet and the Falcon 5X very large body twin.  
The new completion hangar will bring the total facility footprint to 1.25 million square feet. The expansion also includes refurbishment of cabinet, upholstery and headliner shops and an upgrade to older hangars.
The grand opening ceremony was attended by Little Rock Mayor, Mark Stodola, Bill and Hillary Clinton Airport Commissioner, Stacy Hurst and Danny Games, Deputy Director of the Arkansas Economic Development Commission. The guests were welcomed by Dassault Aviation Chairman and CEO, Eric Trappier, Chief Operating Officer, Loik Segalen, and Dassault Falcon Jet President and CEO, John Rosanvallon.
“Little Rock is a Center of Excellence for Dassault and a facility that has long been at the forefront of aviation technology,” said Trappier. “Here we combine the most advanced digital completion techniques — which Dassault pioneered — with a level hand craftsmanship unrivaled in business aviation. This is where the distinct personality of each Falcon comes to life.”
The new expansion follows a $20 million 116,000 square foot upgrade in 2008 that added four new state-of-the-art paint bays, along with new production, design and warehouse space, to accommodate the popular very long range Falcon 7X. Today, Dassault Falcon Jet employs 1,850 people at the facility.
In 2010, Dassault Falcon Jet received approval from the FAA for the use of 3D data during the completion process, making it the first OEM to receive approval for both 3D type design and completion. In addition to enhancing quality, 3D completion provides an opportunity for the customer to visualize the final configuration of the aircraft.
“These investments reflect Dassault’s wholehearted commitment to the city of Little Rock, one that goes back over 40 years,” said Rosanvallon. “Over that time span, the Little Rock plant has grown by leaps and bounds and is now the largest industrial facility in the Dassault network. I like to say that every moment of every day there is a piece of Little Rock flying someplace in the world thanks to the work done here.”




All of this week's top headlines to your email every Friday.


 
 

 

Headlines – September 26, 2016

News F-35A catches fire at Mountain Home Air Force Base – An F-35A caught fire during an exercise at Mountain Home Air Force Base, Idaho, the Air Force confirmed to Defense News.     Business CACI awarded $77 million special operations contract – CACI has been awarded a $77 million contract to provide communications for...
 
 

News Briefs – September 26, 2016

F-35 from Arizona base catches fire during engine start Authorities say an F-35A fighter jet from Arizona caught fire during an engine start at an Air Force Base in Idaho. Officials at Luke Air Force Base in the Phoenix suburb of Glendale say a “ground emergency” occurred about 9:30 a.m., Sept. 23 as the aircraft...
 
 
Northrop Grumman photograph

MQ-4C Triton UAS completes critical milestone to expand Navy’s maritime domain awareness

Northrop Grumman photograph Following a successful Milestone Decision Authority (MDA) led review, the U.S. Navy’s MQ-4C Triton unmanned aircraft system (UAS) obtained positive Milestone C low-rate initial production approval....