Weneth “Wen” Dwane Painter passed away in Pleasanton, Calif., April 21, 2020, at the age of 84.
Wen was born May 8, 1935, in Ainsworth, Neb., and grew up in Mills and Long Pine, Neb. He attended a one-room school house in Mills, and never let anyone forget that America’s first astronauts were Midwest, one-room school house educated too!
Everyone who knew Wen had heard his stories about growing up in the Midwest and how America went to the moon with incredible men who were grounded in common sense, knew how to use a slide-rule and accomplished the mission without the help of computers like we have today.
Wen Painter loved to fly and loved to talk about flying. His hero and role model as a kid was the great American patriot and fighter pilot Art Heiden. He first met Heiden in September 1944 in Mills, and actually got to fly with him in April 1946 and again in 1952.
The stories you have read about young kids hanging around airports in the Midwest are true; Wen is living proof! Painter earned his private pilot’s license when he was 17 by trading work at the Ainsworth Airport for the cost of flight lessons.
He graduated from Long Pine High School in 1953. Shortly thereafter, in June 1953, Wen joined the U.S. Air Force. Wen loved and was proud of his service in the Air Force which was during the time when the B-47 Stratojet was flying.
He was a member of the B-47 Stratojet Association. He entered the U.S. Air Force just as the Korean War was drawing to a close. Painter served four years, and then attended Wichita State University, Kansas, receiving his Bachelor of Science degree in Aeronautical Engineering.
During his final year of studies, Painter met Dr. Don Kordes, who was recruiting engineers for the NASA Flight Research Center at Edwards Air Force Base. He joined the center’s engineering staff in 1963.
At NASA, he worked on the M2-F2, HL-10 and X-24A research vehicles, known as lifting bodies. His engineering focus was on the flight control systems in the lifting bodies. He was in the control room for the first flight of the HL-10 on 22 Dec 1966. NASA pilot Bruce Petersen was in the cockpit and found the controls weren’t working correctly, as a design flaw allowed the airflow to separate from the lifting body’s two-elevens at positive angles of attack which eliminated the roll control. Painter talked to Petersen all the way down to landing.
Paul Bikle was center director at the time and when other pilots and engineers wanted to re-fly the mission, he said, “If Wen Painter doesn’t sign off the flight paperwork on the HL-10, it doesn’t fly.”
The real ‘Six Million Dollar Man’ was Wen’s good friend Bruce Petersen. When Petersen was landing the M2-F2 on May 10, 1967, it began to cartwheel. His life was saved because the design of the cockpit was reinforced with heavy steel, instead of using lead weights for ballast.
Painter was close to many of the original astronauts and all of the test pilots who flew the Lifting Bodies. Wen’s son, Kent, said that when he was young they were often at Paul Manke’s home. He was project pilot on the X-24B and also flew the HL-10, M2-F3, and X-24A lifting bodies. Manke made the first supersonic flight of a lifting body and the first landing of a lifting body on a hard surface runway.
While at NASA, Painter worked on the F-100 Variable Stability Airplane, Lifting Bodies HL-10, X-24A, M2-F2, M2-F3, and STOL Airplanes. The F-8 Supercritical Wing Research Airplane, F-111 TACT (Transonic Aircraft Technology) Airplane, F-111 IPCS (Integrated Propulsion Control System) Airplane, B-57B Atmospheric Research Airplane, AD-1 Oblique Wing Research Aircraft, and the F-15 10-Degree Rotating Cone Experiment. He retired from NASA in 1986 after 23 years of service.
The AD-1 Oblique Wing Research Aircraft was designed by Burt Rutan (Rutan Aircraft Factory) at Mojave Airport in the 1970s and first flight was Dec. 21, 1979, with pilot Thomas McMurtry, someone who is profoundly missed here at Mojave Air & Spaceport.
The AD-1 was flown 79 times, beginning with its first flight late in 1979. The wing was pivoted incrementally over the next 18 months until the full 60-degree angle was reached in mid-1981. The aircraft continued to be flown for another year, obtaining data at various speeds and wing pivot angles until the final flight in August 1982.
The final flight of the AD-1 did not occur at Dryden, however, but at the Experimental Aircraft Association’s annual exhibition at Oshkosh, Wisc., where it was flown eight times to demonstrate its unique configuration.
Over the years, Wen was licensed in multiple fixed wing aircraft. Wen was also as licensed a Commercial Pilot and Flight Instructor in gliders and single engine powered aircraft. He also obtained two Master’s Degrees, from the University of Southern California, as well as from Cal-Poly San Luis Obispo. He also taught Aeronautical Engineering at Cal-Poly. He trained well over a 100 students in both engine and glider certifications. One of his students was the actor Christopher Reeve (Superman) and Wen was fond of saying, “I taught Superman how to fly.”
After retirement from NASA, Painter was an Academic Instructor, Fixed Wing, at the National Test Pilot School at Mojave Airport.
He also was very active in the Explorer Scout Aviation program, teaching many youth how to fly. Many of the Scouts in the program went on to distinguished careers in the Air Force, NASA and as commercial pilots.
Painter was an active member in the Experimental Aircraft Association, Chapter 49; the Society of Flight Test Engineers and the Society of Experimental Test Pilots. Wen was a Founding member of the Mojave Transportation Museum at Mojave Air & Space Port, donating countless hours of his time to Plane Crazy Saturday, a historic aircraft display day held at Mojave on the third Saturday of each month.
Always interested in U.S. Air Force history, Painter was instrumental in bringing the B-17 ‘Sentimental Journey’ to Mojave Airport and Wm. J. Fox Airfield in Lancaster in 2005 and 2009. He helped raise necessary funds for fuel and entertained the crewmembers with his enlightening stories of his aviation careers.
He is survived by his wife JoAnn of Pleasanton; daughters Pam (Terry) Carroll of Long Pine and Debbie Magnusson of Winchester, Calif., son, Kent (Karen) Painter of Beaverton, Ore., step-son, Steve (Claudia) Siglin of Pleasanton; step-daughter, Jamie (Chuck) Raye of Lompoc, Calif.
He is also survived by 12 grandchildren, 11 great-grandchildren and two great-great-grandchildren; and a sister, Wardene Roark of Long Pine; along with numerous nieces, nephews and other family members.
A Celebration of Life for Wen Painter and his extraordinary achievements is being planned at the Mojave Air & Space Port later in the year so everyone can gather and retell his stories and remember his great accomplishments.